Technical Forums» Technical / Performance» Steel / alloy wheels, 13inch x 6&7, other oem options

woohoomobile
» CMF Member

Melbourne
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Occasional forum userOccasional forum userOccasional forum userOccasional forum userOccasional forum user

Steel / alloy wheels, 13inch x 6&7, other oem options

 Sun 10 Nov 2013 04:26:33 PM
Hey.

Im beginning the hunt for info on what other small cars had 13 inch 7 or six inch wide rims.

some of you will know why...

not too fussed on wheel stud PCD at the moment, but i'm not sure if there is much out there that wide.
AB-NRML
» CMF Member

Perth
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Occasional forum userOccasional forum userOccasional forum userOccasional forum userOccasional forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Sun 10 Nov 2013 07:07:24 PM
I have 14×6 alloy wheels from a Mugen Honda CRX. I had to get the centre bores machined out to fit on the micra hubs. 13inch wheels are also available.
woohoomobile
» CMF Member

Melbourne
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Occasional forum userOccasional forum userOccasional forum userOccasional forum userOccasional forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Mon 11 Nov 2013 10:40:06 AM
thanks,

im gonna do a bit a a shopping trip to local scrap yards and wreckers,

tape measure and PCD gauge in hand.

although the want for theses is getting greater...

http://www.aeroracewheels.com/wheel_pgs/thirty_one_series.html

kind of need to trial fit something before i buy good stuff, offset and backspace etc. let alone if the 7 inch will fit under the front at full lock
hotfunk67
» CMF Member

Sydney
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Regular forum userRegular forum userRegular forum userRegular forum userRegular forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Mon 11 Nov 2013 11:35:41 AM
Probably the best bet for 13 x 7 in steelies is from a gemini rwd. I have 13 x 7 in dragways off a gemini which fit well with 165 x 70 stretched tyres.
hotfunk67
» CMF Member

Sydney
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Regular forum userRegular forum userRegular forum userRegular forum userRegular forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Mon 11 Nov 2013 11:40:46 AM
woohoomobile
» CMF Member

Melbourne
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Occasional forum userOccasional forum userOccasional forum userOccasional forum userOccasional forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Mon 11 Nov 2013 12:54:37 PM
How heavy are they Hotfunk?
hotfunk67
» CMF Member

Sydney
Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Regular forum userRegular forum userRegular forum userRegular forum userRegular forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Mon 11 Nov 2013 03:33:27 PM
No idea
OZChris
» CMF Member


Australia

Member since:
Piece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF FurniturePiece of CMF Furniture

Posts:
Occasional forum userOccasional forum userOccasional forum userOccasional forum userOccasional forum user

Re: Steel / alloy wheels, 13inch x 6&7, other oem options

 Wed 27 Nov 2013 09:01:11 PM