intro... - Cisco's Micra Files

ndxxx » CMF Member lismore Australia Member since: Posts:	intro...	Fri 12 Feb 2010 03:49:44 PM
	so ive finally bought a super s cough cough thanks tony :D car is in good condition has nismo shocks/springs and white lines sways as the people who new the car would already know :) havent uploaded pics yet but will soon so far, fog lights have been put back in mirrors and spoiler have been repainted factory silver one of lights i have glued back together and rego should be on the car this week front and back bumpers should be getting resprayed this week will upload pics soon :D

Pierce » CMF Member Logan Australia Member since: Posts:	Re: intro...	Fri 12 Feb 2010 06:32:35 PM
	congrats on the purchase! I wanted tonys for a long time, it was really clean, especially with the green pepper front bar, but factory with lights looks good too. Have fun in your little beast!

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 13 Feb 2010 03:24:47 PM
	so much fun already makes me drool so bad, got rego on the car today so stoked :D

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sun 10 Oct 2010 05:22:39 PM
	hey guys havent updated since i got the car, completely forgot about my thread, anyway, so far things a progressing, have a 9 peice nismo body kit, carbon bonnet, and got a whole heap of turbo part which i should have finished by the end of the year :)

Radiolite22 » CMF Member Singapore Singapore Member since: Posts:	Re: intro...	Mon 11 Oct 2010 05:07:24 AM
	Where did you get your carbon bonnet from??

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 11 Oct 2010 05:37:39 AM
	I'm not sure wit origonally come from as I'm the 4th apparent owner of it, but I pretty sure the person who imported it got it from japan mate

Radiolite22 » CMF Member Singapore Singapore Member since: Posts:	Re: intro...	Mon 11 Oct 2010 06:47:09 AM
	ndxxx WROTE: "I'm not sure wit origonally come from as I'm the 4th apparent owner of it, but I pretty sure the person who imported it got it from japan mate" Any pic mate?

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 11 Oct 2010 08:06:13 AM
	Yeah ill upload some tonight when I get home :)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 11 Oct 2010 04:17:05 PM
	this is th bonnet, obviously the clear is peeling off but is getting flow coated this week if the rain eases up, will have pic of it when it gets re-painted.

Tony » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Mon 11 Oct 2010 07:40:32 PM
	Aaaah my baby.. Come on Nick atleast put up some good pics! Hey Nick was talkin to my brother today and he might want to off load his slx to me.

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 11 Oct 2010 07:47:21 PM
	Tony ill get some quality pics up when I get a good camera, not a phone cam hahahah, and that's great news! Hope your back on the team soon! Good to hear from you by the way!

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 19 Mar 2011 07:33:04 AM
	hey guys basically updating my post as its been way to long, so finally got the bonnet re-done. got half a nismo body kit fitted. had so many problems with it fitting it hahaha, just have the rear bumper and spoiler to go on now. and as for a turbo conversion just waiting for the computer to come off kovert and that will get underway :D
	Image Attached:

climberjoel » CMF Member Canberra Australia Member since: Posts:	Re: intro...	Sat 19 Mar 2011 10:33:52 AM
	looks bloody awesome!!!

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 19 Mar 2011 01:45:05 PM
	cheers buddy :) i think ill be happy when the rest of the body kit is on :P

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Wed 23 Mar 2011 06:48:00 AM
	car gooes in the garage this week to get the nismo H/D clutch and 3.6kg flywheel this week. bloody syked!

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Wed 23 Mar 2011 08:48:10 AM
	how much you blew on the nismo H/D?

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 25 Mar 2011 06:12:05 PM
	cost me 250$ second hand done less than a 1000km

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 02:01:03 AM
	good deal..today at work i was peeking a the specs nismo wanted exedy to make that cover...turns out its almost same spec as standard but cover is chrome molybdenum carbon steel handles 20.000rpm. pretty cool hey, wish the micra can rev that high or half at least lol

jcmicra » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 02:34:26 AM
	wooo! first time i seen that bonnet so shiny! :D nismo kit looking tops what turbo are u going to run? all i need to do is install my one :D meet up for photoshoot sometime

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 08:00:17 AM
	mycra- yeah dude i didnt even know that hahaha, learn something new everyday :P jc- at the moment ive only got a t25 until i find a t28bb. definately got to meet up for a cruise and some photos, i should have my new lens in a couple weeks so it gives me an excuse :P haha

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 05:57:16 PM
	got my injectors from member tyrie yesterday arvo, had some spare time to chuck them onto my rail that will be going onto the turbo, just sr20det ones which should get me rolling :P
	Image Attached:

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 08:04:33 PM
	I've got a nismo reg for that straight bolt on :)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 08:29:15 PM
	adjustable? wanna get rid of it?

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 10:17:57 PM
	yeah adjustable to 10Ka/L/h, flow rate 250m/second. never touched $200

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 26 Mar 2011 10:21:30 PM
	thats a tad to expensive for me at the moment :( bit down on cost at the moment, unless your negotiable on price and payments and stuff.

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Sun 27 Mar 2011 12:08:59 PM
	That's cool let me know when ever... They are going for around 230~ if i put it on eBay

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sun 27 Mar 2011 12:40:14 PM
	PM'D mycra :D

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Sun 27 Mar 2011 10:15:45 PM
	recieved il sent you pic tomoz...

Tyrie » CMF Member Canberra Australia Member since: Posts:	Re: intro...	Mon 28 Mar 2011 08:43:43 AM
	what reg have you got now? I can send you a standard s13 sr20det reg for $8 posted. I'm using same on my sr20det pushing 19psi through a disco potato with cams...

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 31 Mar 2011 06:44:30 PM
	got these bad boys in the mail today thanks to kovet and tyrie :DDDD
	Image Attached:

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 31 Mar 2011 06:44:57 PM
	kovert***
	Image Attached:

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 02:40:07 PM
	so done the aircon and re-routed my CAI today... took me a couple hours so heres some photos if anyone wants to check some of what i did out... and also got my nismo grill put in...

RBLUV » CMF Member Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 04:02:52 PM
	looks great, how much do all the aircon components you took out weigh roughly?

kovert.k11 » CMF Member onjomama Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 04:11:41 PM
	that's the way ndxxx - get rid of that dead weight champ... rip out the abs and piss off the back seats while ur at it mate!

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 04:31:49 PM
	nah fuck that ill keep the heater hahaha its way to fucking cold at the moment.... stil contemplating ripping the abs out.. whats the advantages/disadvantages of it? seats will all eventually go for carbon backed ones and will support a full cageafter the first stage of the turb is done

Greo » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 05:08:41 PM
	Abs stops lock up under heavy brakes Heater & fan is a legal requirement due to safety issues. need it so u can demist ur windscreen. I love my a/c too much to pull it out.

RBLUV » CMF Member Australia Member since: Posts:	Re: intro...	Thu 09 Jun 2011 05:31:14 PM
	it is a roadworthy/engineer item, just dont get defected ;)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 10 Jun 2011 09:50:24 AM
	yeah. decided i will end up ripping that out... any advice where to start on the abs?

Rudy » CMF Member Hunter Valley mob 0400767960 Australia Member since: Posts:	Re: intro...	Fri 10 Jun 2011 10:06:29 AM
	ndxxx WROTE: "yeah. decided i will end up ripping that out... any advice where to start on the abs?" u would need to fit non abs master cylinder and some brake lines i think

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 10 Jun 2011 10:22:34 AM
	hmmmm might get a professionall to do that part.... definately not keen on tampering with my own brakes hahaa

kovert.k11 » CMF Member onjomama Australia Member since: Posts:	Re: intro...	Fri 10 Jun 2011 10:36:15 AM
	master cylinder doesn't require replacement, but u will need to get the brake lines re-plumbed with the ABS unit gone

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 20 Jun 2011 03:47:51 PM
	so this came from import monster today! f@cking so excited! so theres going to be a huge party held and were going to smoke this bad boy into a turbo in the next week or two! stay tuned :P
	Image Attached:

Doom » CMF Member Adelaide Australia Member since: Posts:	Re: intro...	Mon 20 Jun 2011 03:59:53 PM
	ndxxx WROTE: "so this came from import monster today! f@cking so excited! so theres going to be a huge party held and were going to smoke this bad boy into a turbo in the next week or two! stay tuned :P" whats the gasket worth if you dont mind me asking?

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 20 Jun 2011 05:26:03 PM
	I got mine for 300 off imprt monster

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Mon 20 Jun 2011 08:22:02 PM
	2mm

kovert.k11 » CMF Member onjomama Australia Member since: Posts:	Re: intro...	Mon 20 Jun 2011 08:34:36 PM
	where's the love for finding it for you mate? lol

frank2 » CMF Member birmingham United Kingdom Member since: Posts:	Re: intro...	Mon 20 Jun 2011 09:00:47 PM
	ndxxx WROTE: "2mm" just right for 1 bar eh ndxxx ;)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 06:39:59 AM
	2mm should be perfect ;) and kovert mate thank you so much! i wouldnt have most of my parts if it werent for you xoxo hahahaha

jcmicra » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 09:57:53 AM
	want that gasket! >:D seriously tho, nice build :) quality parts...photoshoot sometime! my friend bought xsoarerx's micra so if we combine em all we may have a very nice photo :)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 03:28:02 PM
	yeah JCMICRA! keen as! ive been needing an excuse to use my new lens!!!!

Doom » CMF Member Adelaide Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 03:37:37 PM
	frank2 WROTE: " ndxxx WROTE: "2mm" just right for 1 bar eh ndxxx ;)" How much would this lower the compression? (The standard gasket is 1mm isnt it?)

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 05:00:49 PM
	im not sure... i think it would lowe to about 10.... not 100%

frank2 » CMF Member birmingham United Kingdom Member since: Posts:	Re: intro...	Tue 21 Jun 2011 05:19:25 PM
	my guess would be 8.5:1 there are some online calculators eh, iirc the stock combustion chamber is about 37cc (with gasket and piston dish) and 1mm of blockskim (or extra 1mm h/g) is 4cc

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Tue 21 Jun 2011 07:30:01 PM
	Ahhhh sweet frank! Yeah I weren't to sure of the figures haha

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Wed 22 Jun 2011 05:54:59 PM
	ANOTHER ADDITION! a t28bb will be picked up tommorow for extra HP's hehehe

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sun 17 Jul 2011 10:32:40 AM
	made progress last night, had to grin the bolts of the manifold last night because they were fucked, while i was at it the inlet/outlets of the manifold had huge hollows in them so to prevent leaks and what not i skimmed them back and now there flat as shit and look fucking brilliant. off to get some washers today and new nuts so i can put the t28 on and hook the oil lines and dump pipe up :D

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Tue 19 Jul 2011 06:13:20 PM
	hey guys and gals, got new exhaust/manifold bolts and seals for the oil feed and return today so they went on with the bottome of the speed flow fittings. heres how she stands at the moments :D would love feedback guys ;) thanks hehehe

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 21 Jul 2011 06:37:20 AM
	so lately everything as been going perfect until coming home late last night when a fucking giant wallaby deciced to jump out last minute and take on the micra, the stupid fucking little c%&t!!!!! so far apart from visual damage i dont know what else is wrong with it but will find out today, i cant beleive this..... i actuallly cried. oh well more money to spend on it i guess. ahaha

RBLUV » CMF Member Australia Member since: Posts:	Re: intro...	Thu 21 Jul 2011 07:29:40 AM
	:((

hotfunk67 » CMF Member Sydney Australia Member since: Posts:	Re: intro...	Thu 21 Jul 2011 07:46:35 AM
	that sucks.

Greo » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Thu 21 Jul 2011 10:53:46 AM
	Time for Nismo front bar? I had a simliar thing with a duck flying into my wing mirror that i'd recently repainted black. Had to respray it. Not as bad as a suicidal wallaby though.

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Thu 21 Jul 2011 04:26:25 PM
	it had a nismo front lip on it... fucking off it , not even close to repairable!!! the lip off the front ended up in half from the fucking wallaby. oh well

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 06:29:43 AM
	link buddy?

jcmicra » CMF Member Brisbane Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 08:22:38 AM
	ahhh! badluck! :'( hopefully you dont find any extra damage...buy a big fat front bar so you can fit a bit fat front mount :D turbo looks mint! not too much longer from the parts you have ay

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 09:28:46 AM
	Nah jc not long at all bro, just have to get a few speedflow fittings and just little bits and peices, just waiting on my mate to lend me his mr2 so I can pull mine off the road aye

mycra » CMF Member melbourne Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 10:08:28 AM
	mate....that's painfull. guess my luck's starting to run out. drove to Sydney 3 times, Canberra and along the coast to QLD, havent copped it yet lol S.A in few months fingers crossed !!!

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 08:07:30 PM
	sounds like your doing better then me mate :D hahaha

RBLUV » CMF Member Australia Member since: Posts:	Re: intro...	Fri 22 Jul 2011 09:17:29 PM
	whats the damage ndxxx, looks like just bar/lip/guard? anything behind pushed in?

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Sat 23 Jul 2011 07:39:42 AM
	so far what ive manage to get is front bar, front lip, the plastic inner guard, lower control arm is bent, left front foglight has something wrong with it but i didnt check it out too much, but thats just by eye.... who knows what else, anyway. good news. organised another front bar. i dont know how many times kovert has helped me out but again i owe him another thank you.... waiting on a price for postage and a front bumper will be coming ;) but thats all ill mention at the moment hehehe

ndxxx » CMF Member lismore Australia Member since: Posts:	Re: intro...	Fri 05 Aug 2011 05:36:43 PM
	hey guys... finally had 10 minutes so go and grab some anti seaze!!!!!! some pics with the mani and dump bolted up to the turbo :DDDD enjoy the sexy pics hahaha ;)

RBLUV » CMF Member Australia Member since: Posts:	Re: intro...	Fri 05 Aug 2011 05:59:24 PM
	that is definately very sexy