My K11 Super S (UK)

Hi everyone, thought I would stick up a couple of pics of my super s for you to have a look at.
This is how I bought it:



As it is now:

Not the one I went to buy, that was a quite rough! frank found this in bargain pages 2 miles from his house!
It is in : FL1 – Metallic Teal Pearl

Constantly Updated Spec List
(Coming soon in italic)
Engine & Transmission
-Longlife stainless steel Cat-Back exhaust
-Custom stainless steel manifold, downpipe and de-cat
-Pulsar Short Shifter
-Magnecor KV85 Ht Leads
-GA16 Airbox with BMC Cold air feed and K&N Panel Filter
Brakes
-Standard
Suspension
-Faulkner front and Eibach rear springs (50-55mm drop)
-Bilstein B4 Dampers
-Sparco adjustable strut brace
-Whiteline adjustable panhard rod
-Whiteline front lower strut brace
-Whiteline Castor Kit
Wheels and Tyres
-Speedline Comp 2 14x6
-Toyo Proxes CF1 Tyres
Exterior
-Taiwanese LED rear lights
-De-badged and De-stickered
-Fully colour coded
-Tinted Side repeaters
-Blacked headlights
-Blacked driving lights
-Removed rear wiper
-Wind Deflectors
-Nismo Grille (imported from Japan)
-Nismo Spoiler with LED brake light (imported from Japan)
-Renault Laguna front splitter
-Limo tint (5%) Rear windows/windscreen
-Front fog lights
Interior
-JDM Dash Pod/Cupholder
-Momo Champion Steering wheel
-Quick Release Boss
-Sparco carbon gearknob
-Sparco pedals
-LEDs in heater controls and clocks etc
-Stripped out rear
-ECUTalk ECU reader
-Primera Heater controls
-Black covered SR doorcards with speaker pods
-Black leather gear gaitor
-False floor
-Electric Windows
ICE
-Sony MEX-BT2600 Bluetooth Headunit
-Sony XA-110iP iPod interface adapter
-Sony RM-X4S Rotary Commander
-In-phase XT62ND Slimline front speakers
-Fli Trap 10 Active Subwoofer
Misc
-Remote central locking (rclick.co.uk)
-Ring Airhorns
-Personalised plates
-LED sidelights in headlights and driving lights
-INXX Bonnet Lifters
-Boot popper

Full blog here:
http://www.micra.org.uk/showthread.php?t=24296

Cheers
Joe

Nice ride :)

Now fitted GA16 Airbox with K&N Filter, Magnecor KV85 HT Leads, INXX Bonnet Lifters:

Working on some new headlights:

And some up to date pics of the car:

New bilstein suspension with 50mm lowering springs:

And front lower strut brace:


Spec has also been updated at the top :D

very nice. Love the whiteline gear. I have to get some for mine soon

Now I call that dedication - swapping out the suspension on the road side! :p

Oh yes! I do all my work out there :P No where else to do it! I was covered in mud by the time i was finished!

Is It super difficult to change those suspensions mate? I've got nowhere to do that mod , it's either in the roadside like you did, or at my friend's garage.

I'm not much into technical, but is it impossible to do if you haven't ever removed a suspension b4? any particular tools?

btw debadging what do I need to do it? apart from slicing it the central part & getting a grille. Does the grille screw itself in the plastic?

No suspension is not too difficult, you will need spring compressors for the front thats about it in the way of special tools, Mine is a nismo grille so i didnt chop it up at al.

New headunit fitted:

Its awesome! It now connects to my phone as soon as I switch on ignition and mutes music when i get a phone call, also has a built in mik so i can just talk away lol

And began making a false floor, which hinges on the original seat mounts:

Heh that looks a lot like mine, but I made my vertical piece behind the seat come up a fair way above the floor so stuff doesn't fly forward from the boot :P Looking good though.

---dens

Electric windows fitted and the sony rotary commander fitted. :D





"

yeah...very nice...a lot of work,but the rewards are obviously worthwile...

Yep and better still, I have now rented a garage so no more working on the main road!

Fitted new front panel:


And bonnet pins:



False floor all finished:






Car all clean and shiney for the meet tomorrow:

How it looked on its new coilovers last week:


How it looked on thursday:

ouch

oh shit dude thats horrible....

was thinking how good this thread was and all the work you put into it


it crosses your mind every now and then when you spend so much time doing this stuff how easily it can end!

hopefully you're alright and not hurt that looks like a nasty hit

damn man, i was like 'nice' all the way down and then almost had a heart attack when i saw the crash pics. well with all the work you had done, you had full comp insurance right? either way, it doesnt look a total write off... maybe you can rebuild it?

Man that sucks. What led to that happening mate? Looks like a write off to me.

How much do you want for the LED tail lights?

What a real shame. That back end of the MG? Rover? must be built like a tank as it look hardly damaged.

i'd say it'd be a writeoff money wise, not worth fixing surely

funny thing is my k11 micra blog on the uk site follows a similar pattern

shitloads of work and then a photo of it sitting in a grass ditch

oh well :D

Yer it is deffo a write off, the engine came through and pushed the dash out. LED rears are sold.
I missed a temp traffic light sign and came round the corner and... yer you can imagine the rest.
All for sale on UK micra forum: http://www.micra.org.uk/showthread.php?t=33747

You can find info on this here:
http://www.micra.com.au/second-nissan-micra.php

You will need to glue the grillmesh to the inside of the grill. Or glue a few sticks of flexible but nicely thick steelwire that you can use to hold the grillmesh inplace(this way its easy as shoelaces to fit new grillmesh once in a while without haveing to redo the glueing part.. ;)