Wiring Diagrams of Gauge Cluster - Cisco's Micra Files

crumpets » CMF Member Australia Member since: Posts:	Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 02:03:24 PM
	I am after wiring diagram of the guage cluster with rev tacho. I have a UK model that needs to be wired up, from what I have found Pin 2 (blue/black) is what I need to hook in from? Is this correct?

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 02:17:47 PM
	Here is the only diagram I have found:
	Image Attached:

smidge » CMF Member Sydney Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 03:35:45 PM
	could be wrong but i thought they were plug and play? have you had a search around the site?

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 05:23:29 PM
	Yeah I have, its meant to be plug in play from what I have heard, there is one cable spare (which is blue) but elecy doenst want to wire it in, fearing damage to ecu.. Over cautious but yeah

turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 06:12:16 PM
	err no. plugs straight in brother. i have a uk one in my blue car. the oz km/h speedo is also a straight swap over so you don't have to have the mph one. the only cluster's that are different are the jdm ones. all uk/oz clusters are 100% completely interchangeable.

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 09:11:17 PM
	Yeah i have plugged it straight in from uk but there is no wire from the rev guage.. theres like a location to put something in but there is/was nothing there

turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Tue 02 Sep 2008 10:17:19 PM
	crumpets WROTE: "Yeah i have plugged it straight in from uk but there is no wire from the rev guage.. theres like a location to put something in but there is/was nothing there" worked on both my non tacho equiped lx/slx... without having to wire in extra wires, etc. duno what the go with your's is then.

smidge » CMF Member Sydney Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 12:01:57 AM
	yeah thats weird, im 99% sure there is info on the solution in here, there is a wire running to the ECU and you just tap into it OR you run it straight from the coil but i can't remember which pretty sure its the 1st one the info IS out there you just gotta search search the UK site too micra.org.uk

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 09:46:28 AM
	Yeah most posted relate to tapping into the blue wire coming off the dizzy as in splice into it. Ill get elecy to check the diagram above if it doesnt apply to do that.. Not much else I can do i guess.

Jon » CMF Member Melbourne Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 09:49:42 AM
	Should plug straight in. I installed a cluster from an SR micra last week (with tacho) from the UK in my 1995 SLX works fine, was plug and play :)

tris » CMF Member sydney Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 10:04:16 AM
	+1 for plug and play... not that it helps... haha

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 11:23:44 AM
	Yeah might was meant to be plug and play but for some reason was not.. maybe not super s cluster and just one of the other models (even though that makes no sense). Shits me no end

smidge » CMF Member Sydney Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 12:02:35 PM
	it'll be easy man, run a wire from the ecu where the tach wire goes in and up to the cluster, even if the dash doesnt have the wire, the ECU will, you'll find wiring diagrams somewhere, let me know if you can't find em

Jon » CMF Member Melbourne Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 12:18:47 PM
	There should be a wiring diagram in a thread on the uk site.

crumpets » CMF Member Australia Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Wed 03 Sep 2008 03:00:16 PM
	Thats the one above, was some other 'diagrams' but it was mainly wierd colour things that didnt help (in the DIY members section) Ill suss it out

nz_aj » CMF Member Auckland New Zealand Member since: Posts:	Re: Wiring Diagrams of Gauge Cluster	Thu 04 Sep 2008 06:45:12 PM
	If you have access to another K11 you could trace the wire to make sure where it goes. This is what I did for my JDM K11 that had the same problem as yours, i.e. no wire in loom for connecting ECU to rev counter. All other JDM I know about have been plug & play.