Technical Forums» Aesthetics» some more mods to my micra.
|
squarepants » CMF Member United Kingdom Member since:  Posts:  |
some more mods to my micra. |
Thu 06 Mar 2008 10:03:42 PM |
|
harness
 re-located swoosh tacho  k11 2000+ centre console (silver std insted of black)  the shocker :P  and painted my wheels from athersite to white! also put my unknown :s lightweight wheel nuts on there.  |
||
|
|
||
|
maat » CMF Member perth Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 07 Mar 2008 12:20:41 AM |
|
that looks tuff as with the white wheels nice work.
|
||
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 07 Mar 2008 12:46:28 AM |
|
love the white wheels and the seats how did you put them in was it difficult do you sit much higher..... Not a fan of the big monsta tacho i think they are the ghey sex. But that is your car and looks sweet so keep it up
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 07 Mar 2008 03:45:47 AM |
|
lol i thought the same about the tacho :P but its grown on me now...
the seat lines up with the standard seat subframe front bolts...but the rear bolts are out (welded abit of metal onto mine) otherwise its just bolted with 2 front bolts insted of 4! and is a abit dangeroues... also i think it depends on what seat you use. oh i sit near the same height as the std seat. the cobra is really comfy and you dont slide about like the std seat lol |
||
|
egSi » CMF Member Australia Member since: Posts: |
Re: some more mods to my micra. |
Wed 12 Mar 2008 09:02:27 AM |
|
very nice! :o)
|
||
|
fred » CMF Member Murwillumbah Australia Member since: Posts: |
Re: some more mods to my micra. |
Wed 12 Mar 2008 09:12:09 AM |
|
hmmmmm nice red handled wheelbarrow, sorry, I need to get some seats... that's one huge tacho...U MUST OBEY ME! REV ME TO MY RED LINE OR DIE!!!!!!!!!!(said like a dalek)
|
||
|
fred » CMF Member Murwillumbah Australia Member since: Posts: |
Re: some more mods to my micra. |
Wed 12 Mar 2008 09:33:39 AM |
|
sorry, not myself b4 coffee... looks good...keep going....
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 13 Mar 2008 10:31:41 AM |
|
yearh my red handled drift barrow, its JDM tight yo! lol its ok pal ;) least it keeping the thread alive :P
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Mon 17 Mar 2008 09:01:27 AM |
|
right...my interior is full of crap, so ive strated stripping it out fornt seats are out, and most of the plastic trim....when i get time iam gonna finish the job! hopefully this week if iam not busy, hope iam not :(
|
||
|
fred » CMF Member Murwillumbah Australia Member since: Posts: |
Re: some more mods to my micra. |
Mon 17 Mar 2008 10:22:35 AM |
|
What's the plan?
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Wed 19 Mar 2008 07:27:24 AM |
|
full interior strip... need pics tho, my cam is dead so will try and get some this week. also got my whiteline strut brace to be sent to me, then its bye bye electric windows! in come some lower spec winder units! and prefacelift door cards (as there way lighter!) then plastic windows :P
|
||
|
littlebear » CMF Member Adelaide Australia Member since: Posts: |
Re: some more mods to my micra. |
Wed 19 Mar 2008 07:30:43 AM |
|
Hey mate, how much do you want for the electric windows?
|
||
|
GT » CMF Member Milton Keynes/ Bucks United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Wed 19 Mar 2008 07:31:36 AM |
|
what do you need to change from elec to non. as i wanted to do that and thought it would be to hard.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 20 Mar 2008 08:15:08 PM |
|
just the motor (well the sizzor thing lol)and obv the door cards there just a straight swap...
decided to keep my electric windows now, when there wouldnt be a noticeable diffrance. my plan is to blank off the pass door card and have both door cards in thin metal or carbon sheet, keep my drivers arm rest inc switchs, and get a lower spec arm rest with out window switchs. also, will be getting some perspex windows....got told yesterday by a friend he knows someone who will replecate my windows onto plastic... near £10 a window. if not less! as he charged my friend £10 for a big sheet to fix his next door neighbours green house! |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 20 Mar 2008 10:34:26 PM |
|
pics.
   my fire extinguisher (powder)  |
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Thu 20 Mar 2008 11:31:25 PM |
|
squarepants, stripped out my micra club car like that took a fare bit of weight out, if you get really keen you can take the sound deadner...
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 21 Mar 2008 03:13:17 AM |
|
sound deadning is heavy, its i nightmare to get out, i dont know if i can be arsed.whats the best way to take it out?
also any pics of your club car? |
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 21 Mar 2008 09:56:11 AM |
|
squarepants WROTE: "sound deadning is heavy, its i nightmare to get out, i dont know if i can be arsed.whats the best way to take it out? also any pics of your club car?" yeh it is a pain in the arse to take out.. on the flat surface of the floor, where there is no ribs in the floor the easiest way is a hammer and wide chisel, try not to dig into the floor though. on the lumpy parts of the floor it is easier to use a heat gun to soften up the tar then scrape it off with the chisel. i have not got aany pics of the club car, but i have of our rally car will try and post some up for you. |
||
Image Attached:
|
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 21 Mar 2008 09:56:57 AM |
|
..
|
||
Image Attached:
|
||
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 21 Mar 2008 08:25:03 PM |
|
BEST WAY TO GET IT OUT IS TO USE DRY ICE TO FREEZE IT SO IT IS REAL HARD THEN I USED A AIR CHISIL AND SCRAPPED IT OUT LIKE THAT. hAD IT DONE IN MY COROLLA IN BOUT A HOUR. WEIGHED BOUT 8KG ALL UP.
Sorry for caps. |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 03 Apr 2008 05:25:35 AM |
 my carbon mirrors :) also took my dash board out, removed my heaters.... was gonna keep them out but just took the black carpet stuff out from behined the dash(its heavy stuff! saying its carpet), then i put the heaters back then the dash board. |
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Thu 03 Apr 2008 07:00:20 AM |
|
looking good, you might need the heater in UK lol
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sat 05 Apr 2008 08:04:00 AM |
|
put my heatrs back in now lol.... has window winders insted of electric motors now aswell! you might think iam mad! but i preffer them :S plus i thought they would weight less than electric ones but theres not even a notice weight diffrance when you hold them in your hand! so was abit annoyed the fact i spent £15 on them to be no diffrent!
also re-locted my battery to the boot this afternoon, gonna put my kill switch in when i get time aswell (put it up front, below the dash i think?) :) as for losing weight, been to the scrapyard and got fixed rear 1/4 rubber seals (i have pop outs) so gonna get some perspex rear 1/4 and front side windows made up!..... reason i wanted them fixed is because i dont think pop outs would be strong engough to be made out of perspex they might bow with the wind etc? tbh i think ive done everything i can to lose weight without making it a track car! trying to keep it good for everyday useage! ..... altough its off the road at the mo, until a couple of months :) will get pics up of stuff when i get time. |
||
|
smidge » CMF Member Sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Sat 05 Apr 2008 09:38:14 AM |
|
i reckon you could sell the power window setup pretty easy to get some of that coin back
have you done a kill switch before? pretty easy stuff |
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Sat 05 Apr 2008 12:25:37 PM |
|
what thinkness perspex are you using?
You could change your bonnet to a carbon one and fit some light weight race seats, that should knock a few kilos off.. |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 05:14:27 AM |
|
yerah should sell the electric motors easy, but might keep them just in case lol.
the windows will be the same thickness as std, getting my std ones copied. carbon bonnet i would love, but there £500 to buy from japan, and an extra £500 shipped to the uk....kristian on the micrasportsclub can get some crabon bonnets made up, when i have the money! ive also thought about fixed subframes and carbon seats, hopefully when the money comes rolling in a can buy a carbon seat, on a fixed ae86 subframe, (for those who dont know 86 subframes are the same as micra ones bar one bolt hole that you have to drill) pics:   winders on electric fit door cards (got the idea from the black k11 from the japan meet cisco went to :P)  hard as nails stance:   |
||
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 10:00:24 AM |
|
nice mirrors! get yourself a dry cell battery and some good suspension
|
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 03:15:51 PM |
|
yeh a drycell would be much smaller and lighter.
|
||
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 03:56:10 PM |
|
sportsclassic WROTE: "yeh a drycell would be much smaller and lighter." and safer! it looks pretty 2nd hand.. wouldn't wana be wiping acid of my face if it exploded for whateva reason :( |
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 04:36:58 PM |
|
turbo march-rolling shell WROTE: DIV> and safer! it looks pretty 2nd hand.. wouldn't wana be wiping acid of my face if it exploded for whateva reason :(" yeh true. i thought if it was a non sealed battery it has to be in a battery box? |
||
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 06 Apr 2008 04:46:23 PM |
|
sportsclassic WROTE: " turbo march-rolling shell WROTE: DIV> and safer! it looks pretty 2nd hand.. wouldn't wana be wiping acid of my face if it exploded for whateva reason :(" yeh true. i thought if it was a non sealed battery it has to be in a battery box?" yeh, then it has to have a vent to the outside somehow, r33 skylines run a battery in the boot with a small hose coming of them that exit above the fuel tank to the atmosphere underneath the car, so i spose you could do a similar setup to that, or just get a sealed battery :D! |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Tue 08 Apr 2008 04:08:01 AM |
|
i have a battery box beeing made up by a friend, it sits over the battery and tray, with some L brackets/legs that bolt to the floor.... i wouldnt mind a sealed half size battery but there expensive! when i get the cash iam considering buying one, but this will do for now!
oh and the car has good suspension :p 30mm springs, and kyb dampers....altough coilovers are wanted lol re-located air filter....   just put foil around where it sits to keep the hot air out near that area. not the best job i know but o well :s |
||
|
SSUK » CMF Member London United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Tue 08 Apr 2008 05:00:13 AM |
|
Make sure the battery is very very well bolted down. If you have the unfortunate experience of a crash, that battery will do a lot of damage if it breaks loose.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Tue 08 Apr 2008 05:19:57 AM |
|
lol it aint been boltted down properly yet :s the battery tray is held in with one bolt..., it rocks about as its only half one the flat floor and the rest is on a slight dip that goes into the spare wheel well! so the battery tray tilts and moves! need to do some drilling....plus my box will help keep the lot in place in the event of a crash.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 11 Apr 2008 05:49:35 AM |
|
well screw the k&n lol ive just got a genuine HKS filter! came from an import mr2! got it for £15 inc the piping! just needs a replace-ment sponge!
  dont know what this means? looks like a tourque graph or somthing lol? could mean hks tourqe filter? or hks power filter?? :s  oh and my K10 super s steering wheel! (tommos old one)  |
||
|
fred » CMF Member Murwillumbah Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 11 Apr 2008 07:22:19 AM |
|
hay... just to improve it again.. put an oil catch can on the the oil vapour line from the head to the cleaner(oil vapour kills octane levels)...... and a bit of a heat shield to divert the radiator exit air away from the intake. Its looking good!
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 11 Apr 2008 10:17:50 AM |
|
hmmm, oil catch can never really thought about that pal! hmmm think i will pop in to my local motor factors and get one and just stick it between in the pipe line!
plus good spotting! i would never of thought to wrap the rad pipe up! lol only just noticed that its sat in-front of my filter! cheers for the help ;) |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 13 Apr 2008 05:37:25 AM |
 sorted my off colour wheel out....everytime i painted it went creamy white insted of a bright white :s |
||
|
fred » CMF Member Murwillumbah Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 13 Apr 2008 11:47:16 AM |
|
are you sure you've got lower springs? looks high doesn't it? looks neat th, are you happy with the intake changes?
|
||
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 13 Apr 2008 12:53:32 PM |
|
wow, some one likes alluminium foil
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Mon 14 Apr 2008 08:56:25 AM |
|
yep iam sure its lowered lol! it used to sit high on the rear with all the interior in never mind with it stripped! to me they only seem like 30mm springs but meh! iam only bothered about the stiffness of them not the looks! fuction over form!
i love the intake! way better than sat on top of the throttle body! yep i love the foil lol....bettween you and me it hides a BIG paint fook up :s lol shhhhhhh |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Mon 14 Apr 2008 09:00:27 AM |
|
how it used to sit with interior in.
 oh and my old exhaust!  |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 17 Apr 2008 03:57:38 AM |
 my new wheel, painted matt black.... the k10 super s one was too big like driving a bus! so banished that one to the shed....iam tempted with power steering now tho lol |
||
|
maat » CMF Member perth Australia Member since: Posts: |
Re: some more mods to my micra. |
Thu 17 Apr 2008 10:02:08 PM |
|
holy shit how loud was your old exhaust thats insane!
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sat 19 Apr 2008 02:15:10 AM |
|
mega loud! used to set car alarms off! tbh was stpuid on a NA car...well stupid on a micra aswell! was good for the attension tho, just made it a laugh to drive daily! lol
say that my mate had a 4branch manifold back straight through exhaust 2" with no boxes on his micra! and that was fecking loud!!!! |
||
|
sarge3uk » CMF Member sheffield United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sat 19 Apr 2008 04:04:50 AM |
|
love it mate its well smart keep it going
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 20 Apr 2008 08:48:50 PM |
|
cheers pal! i do love the way it looks. tbh bodywork wise iam happy with it, dont want to go ott.....i have some honda civic EG std sideskirts that have been modified to fit the micra but iam not sure if to fit them!
heres a pic of them on tommos old micra:   i have just got some smoked indicators....and have some fixed rear 1/4 window glasses so i can get them made into perspex! plus need to get my ass over to nissan and order some march convertiable baseplates! oh and ive asked a graphic maker to make me up a march cup sunstrip! but he hasnt got back to me yet! after that...iam thinking some super march LED rear lights and iam happy with the looks of my micra :) |
||
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: some more mods to my micra. |
Tue 22 Apr 2008 08:31:25 AM |
|
Wow! :O
This looks unsafe.. :S Some of the pictures are showing some scary stuff.. |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Tue 22 Apr 2008 09:51:44 AM |
|
????
take into account its not on the road at the moment..... |
||
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: some more mods to my micra. |
Thu 24 Apr 2008 12:55:21 AM |
|
Didnt try to offend you in any way mate..
Sorry if you got that idea.. :S I meant that tha inside of the car is a realy unsafe environment for road use when there is almost no interior left in it.. And as others have pointed out the battery etc. Cheers Are |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 24 Apr 2008 08:15:05 AM |
|
nah matey you didnt offend me...was wondering what you was on with lol....tbh the stuff i have removed wont really save me in a crash! i.e crapet and roof liner, i still have my dash, and seats :P
as said battery is dangerous, need to get the battery box of my mate! hes been making at his work! still havent heard if he has finshed it yet! |
||
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: some more mods to my micra. |
Sun 27 Apr 2008 02:34:29 AM |
|
I see! :D
Batterybox will work fine. There are a few good universal ones out there to.. This one only needs some kind of ventilation. |
||
Image Attached:
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 27 Apr 2008 08:54:34 PM |
|
ooooo... thats cool. how much do they sell for?
|
||
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: some more mods to my micra. |
Wed 30 Apr 2008 07:23:53 AM |
|
squarepants WROTE: "ooooo... thats cool. how much do they sell for?" Hi again! Here is meashures and cost price.. 285 x 195 x 255 mm 79,90 NKR 330 x 195 x 260 mm 99,90 NKR Cheers Are |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 02 May 2008 07:09:58 AM |
|
car now de-bump striped.... BUT with me beeing 16 with a modified car the insurance wont be happy :p so its all gone back to std.... been busy doing:
interior re-fitted std front seat fitting- sent my cobra seat to the shed.. battery upfront in std place std front shocks and springs with std rear springs and KYB shocks std alloys back on std airbox....only mods are: harness on drivers seat short shifter de-cat so my car is an SI model with maunuel windows, and fixed rear 1/4 windows :P nearly a low spec model now lol.... oh also my std back box is beeing fidled with, well choping of rear tip and welding a 3" laser tip on... is loud at the mo! only has std manifold straight through! everyone in my village hates me for it :P |
||
|
maat » CMF Member perth Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 02 May 2008 10:00:45 PM |
|
wow what a waste of time that was, insurance is a bitch
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sat 03 May 2008 05:01:57 AM |
|
yearh lol....at least it will be easier to re-move interior etc 2nd time round....plus i know what its gonna be like. oh well...rather be insured properly than not telling them about my mods!
|
||
|
sarge3uk » CMF Member sheffield United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 04 May 2008 06:09:26 AM |
|
true mate make a track car you no you want to,you would of fought it would be cheaper with no rear seats due to you only carrying you and a passenger
|
||
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 04 May 2008 10:08:36 AM |
|
yeah but if you put all that in and then get insurance that is how it has to stay. If you crash and they come to look at it. You have taken all the shit out they can revoke your insurance and you will not get paid out. Tis my line of work so i do know.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Sun 04 May 2008 07:26:53 PM |
|
well when i ring the insurance up i will ask if its cheaper stripped out...
|
||
|
sportsclassic » CMF Member sydney Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 04 May 2008 07:57:30 PM |
|
squarepants WROTE: "well when i ring the insurance up i will ask if its cheaper stripped out..." doubt that it will be cheaper... |
||
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: some more mods to my micra. |
Sun 04 May 2008 08:56:55 PM |
|
if you strip all the sound deadening out then put the carpet back in then you will be ok. Take the stereo out and will be cheaper but then will take away from the value of the car therefor loosing money on what you would get paid out. I would just tell them the mods the interior wont be an issue. TO be honest i dont think any of it would be. It is not major mods.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Thu 03 Jul 2008 09:52:55 PM |
|
been up to more stuff....
new willans 4-point harness   whiteline brace and red bull catch can   a front bumper that iam working on. note only put on the car for pics   flocked dash   march plate holder:   and how she looks on the front inc black mirrors.  |
||
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: some more mods to my micra. |
Thu 03 Jul 2008 11:08:49 PM |
|
what dash is it or what did you do to it. Looks good. I like it lookin good.
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 04 Jul 2008 08:21:24 AM |
|
its a standard dash that has been flocked (populor with rally and race cars) flock is like swade but not as thick...a proffesinal company did it for £100 plus postage there and from.
|
||
|
maat » CMF Member perth Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 04 Jul 2008 03:03:15 PM |
|
red bull catch can?
|
||
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: Posts: |
Re: some more mods to my micra. |
Fri 04 Jul 2008 04:34:28 PM |
|
maat WROTE: "red bull catch can?" it gives him wings ffs :D... dash looks good, but a little out of its element with all the grey happening around it :( |
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Fri 04 Jul 2008 07:49:17 PM |
|
dash looks better in person, pics dont really do justice it blends in slightly with my seat...want to re-trim my door cards with some black material...wouldnt mind getting the green patterns on my pass seat trimed black also. and get a nismo gear knob as the one on at the mo looks cack imo lol
|
||
|
squarepants » CMF Member United Kingdom Member since: Posts: |
Re: some more mods to my micra. |
Tue 05 Aug 2008 08:33:16 AM |
|
modified the bumper abit more, holes help air get to the RAD and engine for cooling..even put on a 12x6 jap plate. still need to get the bumper painted!
  |
||