Extra injector

this is a call out to any of the boys who are running extra injectors in their inlet manifolds

just after a pic of diagram or whatever else that will give me some insight on how you did it...

also curious of where you tapped into the fuel rail, and if the rails and lines and pumps etc are big enough to handle the extra injector

i've got a few spare 380cc injectors that would be perfect for the job, and to sell on to anyone else planning the conversion...

any help would be awesome guys thanks!

My car is running an extra Micra injector. I've only had the car for a short while. PM "Dark Side" he can give you better info then me.

Mychael

Hey smidge..
Have you seen the greddy e-manage systems on ebay!
$420.... Bloody cheap.
Giving it some serious thought here, and just run 4 larger injectors...

hey JKL - yeah could be a go-er?

i'm probly gonna run a td-04 or VF series turbo which all have the same flange... i can get my hands on a few of these i think

either way i still want a manifold :D

Can anyone tell me if the Greddy Emanage is suitable for turbo conv/boost up to 15 psi?

No probs smidge... Should be finished this afternoon/tomorrow. will post a pic and let you know.

save yourself the trouble in the future..just get a full ecu..

i tried to save cash and used an emanage and ended up just changing to a full ecu..easier to tune, better tuning options, map sensor..etc.

i used a ems stinger. they cost about a grand.

is it worth going full manage even for a low boost/budget setup?

not realy keen on going down the forged/high boost road really!

No need. If boost is around 7psi max the existing unit plus a Haltech works fine with a 5 th. injector set up. Standard fuel pump okay. Look at Family Hacks dyno chart and see how the air fuel ratio is spot on right through the rev range.

MMMM... Ok so emanage is out. Thanks Aaron.
I intend on a bit more than 7psi on my one.

BTW, I can get some real good prices on Adaptronic. Distributer Cost!

PM Ed in the UK. He will be able to tell you exactly what you can get from a standard micra ECU using an Emanage.

Again as good as the piggyback is, it will be limited by the ECU's functionality and of course the competancy of your selected tuner.